admin

Author Archive

Sep
02

Chicago skylight replacement

Posted by: admin | Comments (0)

Chicago skylight replacement

If you live in the Chicago area and have skylights on your home, chances are you will have a leak at some point. Chicago winters are hard on roofs as well as skylights, when water freezes, it breaks the seal on flashing and any other area that gives even a little room for water to penetrate.

If your Chicago skylight is beyond repair and you want to replace it, you have several choices. First you could have the skylight removed and the hole cover up. Chances are the skylight was there to let  light into a dark area, so you may not wish to choose this option. The next choice is to install a sun tunnel rather than a skylight.  This reduces the chances of leaking in the future while still allowing light to get in. The final option is to replace the skylight with a new one. if you choose to do this, I recommend using VELUX Skylights.

VELUX, the world leader in skylights and roof windows, puts to excellent use our most abundant natural resource – light from above – by developing, manufacturing and marketing environmentally friendly products that provide and control daylight and fresh air in buildings, and products that heat water with solar energy.

High quality, energy efficient skylights are an important part of building today’s green friendly homes and buildings. The effect that natural light has on you physically, emotionally and psychologically is well documented. The benefits of natural light can have a profound impact on you personally, while the stewardship of VELUX will positively affect our environment for future generations.

Aug
20

Work Van For Sale

Posted by: admin | Comments (0)

1988 Chevy van runs great with many new parts, new exhaust, new fuel system, new tires on the back, and more. THE VAN IS IN TINLEY PARK…Did ya get that? THE VAN IS IN TINLEY PARK. Pleas don’t call me and ask where the van is located… I’ll say it again just in case you missed that: THE VAN IS I TINLEY PARK… lol

Call 708-574-8052

I also have some tools for sale. (Also located in TINLEY PARK).. lol

Comments (0)

Flat Roof Repairs with Aluminum Coating

One of the most common places for water getting in on Chicago flat roofs, is on the back end of the roof. Cold and icy Chicago winters cause splits in the seams of the old rubber or roll roof membrane.  This video show a complete repair using Mule-Hide silver coat:

Comments (0)
Aug
15

Ridgid Roofing Coil Nailer For Sale

Posted by: admin | Comments (0)

Roofing Tools For Sale Southwest Chicago

I have roofing tools for sale now that I am retired from roofing. The first item that I’m putting up for sale is a Ridgid roofing coil nailer that works fantastic. It comes with a total of 200′ of air hose in four 50′ sections. Three of the 50′ are new and still in the wrapper.

It also comes with a 4-way t-valve that was hardly ever used. All this for only $125.00 Call 708-574-8052. I live in Tinley Park.

Ridgid coil nailer

200′ of air hose

4-way t-valve

Only $125.00

Comments (0)
Aug
12

Using Solar Power

Posted by: admin | Comments (0)

Using Solar Power

When you think of solar power you think of heating and light for your home. That is one of the many things that we use solar power for. Solar power is everywhere and it is growing everyday. There are different products that are made using solar power. This article will list these products and their uses and also how solar power affects them. Solar power is using the sun’s natural heat to produce electricity, heat, and more. When you use solar power you are using the natural resources found that cannot harm the earth in ways that other methods can.

There are more products that use solar power than what we realize. A lot of the electronics made will use some type of solar power in order to function completely and accurately. For example, calculators are solar power products. These calculators may or may not have on and off switches. Some rely on the solar panel completely in order to stay or turn off. Solar power calculators need a certain amount of light inside the solar panel in order to turn the calculator on and perform what you want it to do; add, subtract, divide, multiply and more. The solar panel in a calculator is not as big as the one that you would to power your home. The size needed for a calculator is adjusted before installation to provide the right amount of what it needs. Solar power products can be found in travel products, outdoor recreation, safety products, emergency products and more.

Radios have are produced with a solar panel inside that transforms the sunlight into energy allowing you to listen to your radio while you are outside. You may also find solar power in flashlights, battery chargers, mobile phone chargers, watches, lanterns, emergency products such as sirens and lights. As you see there are several products that are using the solar power technology. Portable chargers are great to use because they charge the product that you have using the sunlight just as easy as turning a calculator on. Camping equipment and supplies work well with solar power because it allows the sunlight during the day to supply their lanterns, flashlights and radios at night.

Cooking outdoors can also be done by using solar power in order to heat the element that will ignite and allow for even cooking. Because more people are turning to solar power for their future energy source there are companies that are marketing products that are produced using solar power. Appliances are being made for solar power homes. These appliances, refrigerators, stoves, dishwashers, and more will work great in a home that is generated by solar power. They are built to conserve energy even more so than the products available to everyone.

In the future when everything turns to solar power in order to work we will be prepared using the knowledge and the products that are available today. We can’t predict the future in solar power but we can all do our best to make it happen.

Aug
12

Modified Bitumen Flat Roof Leak Repair

Posted by: admin | Comments (0)

Chicago Flat Roof Leak Repair

A professional’s touch on a flat roof leak repair. Water was intruding through a bad seam in a ponding area of the roof. After filling the void with 1/2″ celetex insulation board (he tapered the edge’s with his foot for a smoother transition to the existing roof) he fastened some 75lb base sheet and then applied granulated modified bitumen cap sheet. As you can see, this roofer has bled a few seams in his day (he has a tattoo of a propane torch on his arm!).

He torches the “meat” of his roll, then returns to bleed the seams. His foot seaming technique is known around here (new orleans) as the “Tucky Two-Step”. A Perfect 1/4 to 1/2″ bleed everytime. This application was a rare occasion that matching white loose granules were not applied to the still hot tar seam to blend it in with the rest of the roof field and to protect it from sun damage (with the rest of the roof being well aged, granule coating the hot seams on this patch would certainly be overkill).

Comments (0)
Aug
07

Garage floor remodeling

Posted by: admin | Comments (0)

Garage floor remodeling

The garage is a very important part of your house. It is not only
the room where you keep your car but it can be used also as a
storeroom. In the garage you keep things that you do not use
everyday or things that you want to dispose of later on. Sporting
equipment is usually stored in your garage. Also, a lot of
people use the garage as a laundry, a workshop or even as a
home office. The growing importance of the garage has increased
the number of remodeled garages through the past years. Garages
are becoming an integral part of the house.

One of the things that need to be changed when planning
to remodel your garage is the floor. Concrete floors serve the
purpose of flooring but do not look good, even if you paint it,
the floor will look bare. It is best to have a garage expert
adviser to do the job. The best type of garage floor is made of
specially formulated polyvinyl, this special material for
flooring conceals cracks and protects the floor from getting
stained. This flooring protects the floor from accidental spills: oil,
battery acid, grease and any other dirt that gets into your garage.
By making a few minor changes to your garage you can transform
it into an attractive storage room.

Aug
07

Solar Power Systems

Posted by: admin | Comments (0)

Concentrating Solar Power Systems

If you have ever seen a field with several mirrors pointing toward the sun you may be looking at a solar power system. These systems work to concentrate the sunlight to one area and use the heat to heat up the liquid that flows along the pipes.  This system is called Parabolic-trough system.  This type of system heats oil that is flowing through the pipe.  The oil is hot and that is why it is used to boil water to power a steam generator which in turns powers electricity.

The reason that this system works so well is because the U-shaped mirrors attracts and collects the suns heat which is then transferred onto the receiver.  The receiver absorbs the heat and transfers into fluid which helps to power the engine.  The heat causes the fluid to swell up against the piston and that produces mechanical power.  This type of power can be used to run things like generators or even an alternator that will produce electricity. This system works great when because it uses molten salt that flows through the receiver.  When the salt heats up it can generate electricity through the steam generator.  The salt holds in the heat for several days before it has to be converted into electricity.  Because this system uses so many panels it is mainly used for industrial solar power where acres of land can be donated to the Parabolic Trough.  There can be enough power in the network that can create energy for several days or more.  Because this system is so large that it allows the heat that it saves to be transferred days later.

Through this project and other solar power projects we can understand fully how solar power works. When we see how much solar power is conserved using these U shaped mirrors we can also understand how much energy is lost.  Using concentrating solar power systems are beneficial to the businesses that use them because they won’t have so much time down when the power fails.  Machinery is their only major concern and as long as their machines are taken care of there should be no problems. Industrial type of solar power can attract and trap a lot of heat from the sun during the day, especially using mirrors that will reflect the sunlight.  It also helps to have this type of solar power out in an open field free of trees and vegetation that may grow around and at some point crowd the solar light out.

Scientist are continuously studying this theory as businesses use it to power their machinery.  Steam power was what was used from the beginning with solar power and is still what most systems depend on to service their production needs.  In the future, fields may eventually be full of mirrors that somewhat point up to the sky in hopes of generating enough sunlight to heat the world.  Until then we will use the traditional methods of heating water, heating our homes and powering our electricity.

Aug
07

Renting an Apartment

Posted by: admin | Comments (0)

Before Renting an Apartment

Renting an apartment is a very serious decision which warrants a great deal of attention before a final decision is made. When choosing an apartment to rent, renters have a variety of factors to consider including, but not limited to, price, size, location, amenities, whether or not they want a roommate and how long they want to stay in the apartment. Those who plan to rent an apartment should consider all of their options before making a decision to ensure they are making the best possible decision. This article will discuss the importance of considering all of the possible options as well as the possibility of having roommates and the importance of reading contracts carefully.

Consider All of the Possible Options

When renting an apartment, the renter should first investigate all of the options available to him to ensure he is able to make an informed decision. This is important because the renter may not even be aware of all of the available options until he starts to for an apartment. The best way to find out what type of apartments are available is to do some research on the Internet and in newspapers and rental magazines and then start visiting apartments which seem interesting. In visiting the apartments the renter will get a better idea of the size and types of amenities which are available in his price range. He will also begin to learn more about the types of amenities available. This is important because not all apartments will offer the same amenities. Renters may not find what they are looking for unless they visit a few places before making a decision.

Consider the Possibility of Roommates

Deciding whether or not to have a roommate or multiple roommates is one of the important decisions a renter will have to make. This is an important decision because roommates can make a living situation either significantly better or significantly worse depending on a number of factors. These factors may include compatibility of the roommates, ability to pay the rent and ability to assist in the household activities.

Having roommates can make an apartment more affordable. Often larger apartments may be more affordable for two people than a smaller apartment would be for one renter. Additionally, apartments designed for two or more people often have a larger overall living space with a larger kitchen, dining room and family room. This makes the possibility of roommates very appealing to some renters.

However, there are some caveats to making the decision to live with a roommate. Care should be taken to carefully screen potential roommates to ensure they are not potentially harmful. Strangers do not present the only potential roommate problems. Problems may even occur when the roommate is a trusted friend. In these cases, compatible living styles may be the issue. For example, if one roommate likes to stay up late and listen to music or watch television and the other roommate likes to go to sleep early there can be some conflicts if compromises are not made. Also, if one of the roommates is particularly neat and the other rather messy, conflicts may arise.

Read the Contract Carefully

Whether a renter opts to have a roommate or not and regardless of the type of apartment they select, the renter should be careful to read the contract before signing it. This is important because a rental agreement is a legal document and the renter should understand this document before they sign the agreement. Many renters may never need to know the exact information in their contract document but if a dispute arises, the renter should be aware of his rights. Additionally, the renter should pay special attention to any sections of the contract which specify the landlord’s ability to evict the tenant. Contract sections specifying the requirements of the renter are also very important. This may include requirements for breaking the lease agreement in the event that the renter has to move before the lease period ends.

Jul
13

How to keep your laminate floors clean

Posted by: admin | Comments (0)

Laminate floors:

* Never use abrasive cleaners, steel wool or scouring powder.
* Do not use soap-based detergents or “mop-and-shine” products.
* Never flood your floor with water or cleaner.
* NEVER USE A SOAKED WET MOP AND LEAVE
* FLOOR TO AIR DRY
* Do not wax or polish your laminate floor.
* Laminate flooring can expand if excessive water is used while cleaning.
* After damp mopping, a clean dry cloth should be used to wipe your floor
* immediately and thoroughly.
* Laminate flooring can expand if excessive water is used while cleaning.
* After damp mopping, a clean dry cloth should be used to wipe your floor thoroughly.

Spray it with a wood laminate floor cleaner and wipe it clean with a damp towel. You can purchase a wood laminate floor cleaner at your local home improvement store. Make sure it is marked clearly for cleaning wood laminate floors. You need to avoid using soapy cleansing agents. Armstrong makes a great wood laminate floor cleaner

Use dry towels to wipe up any remaining water on the wood laminate floor. Now your floors should look brand new.

Use these steps to keep your laminate/wood floors looking new longer:

* Step 1. Sweep laminate floors regularly with a broom or dust mop. To clean them more thoroughly, use a damp cloth or mop. Make sure it is wrung out well as too much water may damage the floor. Dry the floor with a soft, clean and dry towel.
* Step 2. Clean up spills immediately with a clean, dry towel or paper towel. Remove any sticky residue with a clean, damp cloth and dry the area well with a dry towel.
* Step 3. Use protective pads under furniture to prevent gouges or scratches.
* Step 4. Place a doormat in front of doors to help to prevent dirt and excess moisture from being tracked in onto the floors.
* step 5. Don’t use a vacuum with a beater bar as it may scratch your floor.

The attachments that come with your vacuum are useful to clean the edges or to get to hard to reach areas.

Comments (0)